Grouting with an epoxy two-component mixture is carried out only after the tile adhesive has completely hardened (information about this is given on the package with the dry mixture).
1. Add the catalyst to the container with the paste and mix thoroughly with an electric drill with a nozzle.
2. Then pour decorative additives into the mixture, if any, provided by the manufacturer, and mix thoroughly again..
3. Fill the joints with a special trowel with a rubber nozzle..
4.After grouting, proceed to clean the cladding. To remove grout streaks from ceramic surfaces, moisten the tiled surface with spray water and then clean with a sponge. Use a special liquid ceramic coating agent.
5. Remove the remains of the mixture with a grater with a cellulose nozzle and a sponge. Then wipe it off with a napkin. The final hardening of the composition occurs in 3-5 days..
